RG-AP810-L Wi-Fi 6 Dual-Radio 1775 Mbps Indoor Access Point

Unit dimensions

(W x D x H)

220 mm x 220 mm x 49 mm (8.7 in x 8.7 in x 2.0 in)

Shipping dimensions

(W x D x H)

507 mm x 319 mm x 278 mm (20.0 in x 12.6 in x 11.0 in)

Unit weight

Device: 0.6 kg (1.33 lbs)

Mounting bracket: 0.07 kg (0.15 lbs)

Shipping weight

1.04 kg (2.29 lbs)

Mounting

Wall/Ceiling-mount (A mounting bracket is delivered with the main unit)

Lock option

Kensington lock and securing latch

Radio design

Dual-radio

Radio 1: 2.4 GHz, two spatial streams, 2x2 MU-MIMO

Radio 2: 5 GHz, two spatial streams, 2x2 MU-MIMO

Operating frequencies

Radio 1, 802.11b/g/n/ax:

●    2.400 GHz to 2.4835 GHz, ISM

Radio 2, 802.11a/n/ac/ax:  

●    5.150 GHz to 5.250 GHz, U-NII-1

●    5.250 GHz to 5.350 GHz, U-NII-2A

●    5.470 GHz to 5.725 GHz, U-NII-2C

●    5.725 GHz to 5.850 GHz, U-NII-3/ISM

Note: Country-specific restrictions apply.

Data rates

Combined peak data rate: 1.775 Gbps

2.4 GHz radio, 574 Mbps

●    Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (max.)

●   Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical)

5 GHz radio, 1.2Gbps

●   Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate to 2SS HE80 802.11ax client devices (typical)

Data rate set

The following 802.11-compliant data rates in Mbps are supported:

2.4 GHz radio

●    802.11b: 1, 2, 5.5, 11

●    802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24 ,36, 48, 54

●    802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

●    802.11ax: 8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)

5 GHz radio

●    802.11a: 6, 9, 12, 18, 24, 36, 48, 54

●    802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)

●    802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT80)

●    802.11ax: 8.6 to 1,200 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80)

Packet aggregation

802.11n/ac/ax: A-MPDU and A-MSDU

Antenna type

Built-in omnidirectional antennas (two 2.4 GHz antennas and two 5 GHz antennas)

Max. antenna gain

2.8  dBi in 2.4 GHz and 3.6 dBi in 5 GHz

The downtilt angle for the maximum gain is roughly 30 degrees.

With reference to the pattern of each antenna of the MIMO radios, the maximum gain of the effective per-antenna pattern is 2.3 dBi in 2.4 GHz and 2.7 dBi in 5 GHz.

Max. transmit power

2.4 GHz radio: 26 dBm (23 dBm per chain)

5 GHz radio: 26 dBm (23 dBm per chain)

Note: The transmit power is limited by local regulatory requirements.

Power increment

Configurable based on requirement

Radio technologies

802.11b: Direct-Sequence Spread-Spectrum (DSSS)

802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)

802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA)

Modulation types

802.11b: BPSK, QPSK, CCK

802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM 

802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

2.4 GHz, 802.11b

1 Mbps

23 dBm

–91 dBm

2 Mbps

23 dBm

–91 dBm

5.5 Mbps

23 dBm

–90 dBm

11 Mbps

23 dBm

–87 dBm

2.4 GHz, 802.11g

6 Mbps

23 dBm

–89 dBm

24 Mbps

22 dBm

–82 dBm

36 Mbps

22 dBm

–78 dBm

54 Mbps

20 dBm

–72 dBm

2.4 GHz, 802.11n (HT20)

MCS0

23 dBm

–85 dBm

MCS7

19 dBm

–67 dBm

2.4 GHz, 802.11n (HT40)

MCS0

23 dBm

–82 dBm

MCS7

19 dBm

–64 dBm

2.4 GHz, 802.11ax (HE20)

MCS0

23 dBm

–85 dBm

MCS11

15 dBm

–58 dBm

2.4 GHz, 802.11ax (HE40)

MCS0

23 dBm

–82 dBm

MCS11

15 dBm

–54 dBm

5 GHz, 802.11a

6 Mbps

23 dBm

–89 dBm

24 Mbps

22 dBm

–82 dBm

36 Mbps

22 dBm

–78 dBm

54 Mbps

20 dBm

–72 dBm

5 GHz, 802.11n (HT20)

MCS0

23 dBm

–85 dBm

MCS7

19 dBm

–67 dBm

5 GHz, 802.11n (HT40)

MCS0

23 dBm

–82 dBm

MCS7

19 dBm

–64 dBm

5 GHz, 802.11ac (VHT20)

MCS0

23 dBm

–85 dBm

MCS9

18 dBm

–60 dBm

5 GHz, 802.11ac (VHT40)

MCS0

23 dBm

–82 dBm

MCS9

18 dBm

–57 dBm

5 GHz, 802.11ac (VHT80)

MCS0

23 dBm

–79 dBm

MCS9

18 dBm

–53 dBm

5 GHz, 802.11ax (HE20)

MCS0

23 dBm

–85 dBm

MCS11

16 dBm

–58 dBm

5 GHz, 802.11ax (HE40)

MCS0

23 dBm

–82 dBm

MCS11

16 dBm

–54 dBm

5 GHz, 802.11ax (HE80)

MCS0

23 dBm

–79 dBm

MCS11

16 dBm

–52 dBm

Bluetooth

Bluetooth 5.1

Antenna type

1 x onboard built-in omnidirectional antenna

Max. antenna gain

2.4 dBi, with a downtilt angle of roughly 30 degrees

Max. transmit power

17 dBm (GFSK)

14 dBm (π/4-DQPSK, 8-DPSK)

Receive sensitivity

–95.5 dBm (DH5)

–95 dBm (π/4-DQPSK)

–87.5 dBm (8-DPSK)

Fixed service port

Uplink: 1 x 10/100/1000Base-T RJ45 Ethernet port with auto-negotiation

●    Compliance with IEEE 802.3af standard (PoE)

●    Auto MDI/MDIX crossover

●    PoE-PD: 54 V DC (nominal) 802.3af/at/bt (Class 3 or higher)

●    802.3az EEE

Fixed management Port

1 x RJ45 console port (serial console port)

Status LED

1 x multi-color system status LED

Button

1 x Reset button

●    Press the button for shorter than 2 seconds. Then the device restarts.

●    Press the button for longer than 5 seconds. Then the device restores to factory settings.

Input power supply

The AP supports the following two power supply modes:

●    48 V DC/0.6 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power adapter needs to be purchased separately.

●    PoE input over PoE-in port: The power source equipment (PSE) complies with IEEE 802.3af/at/bt standard (PoE/PoE+/PoE++).

Note:

●    If both DC power and PoE are available, DC power is preferred.

Power consumption

Max power consumption: 12.95 W

●    DC powered: 12.95 W

●    PoE powered (802.3af): 12.95 W

●    PoE+ powered (802.3at): 12.95 W

●    PoE++ powered (802.3bt): 12.95 W

●    Idle mode: 6 W

Temperature

Operating temperature: –10°C to +50°C (14°F to 122°F)

Storage Temperature: –40°C to +70°C (–40°F to +158°F)

Note: At an altitude between 3,000 m (9,843 ft) and 5,000 m (16,404 ft), every time the altitude increases by 220 m (722 ft), the maximum temperature decreases by 1°C (1.8°F).

Humidity

Operating humidity: 5% to 95% RH (non-condensing)

Storage humidity: 5% to 95% RH (non-condensing)

Environment standard

Storage and shipment environment: NEBS GR-63-CORE_Issue3_2006 GB/T 2423.6-1995

Mean Time Between Failure (MTBF)

200,000 hours (22 years) at the operating temperature of 25°C (77°F)

Regulatory compliance

EN 55032

EN 55035

EN 61000-3-3

EN IEC 61000-3-2

EN 301 489-1

EN 301 489-3

EN 301 489-17

EN 300 328

EN 301 893

EN 300 440

FCC Part 15

EN IEC 62311

IEC 62368-1

EN 62368-1

Applicable software version

AP_RGOS 11.9(6)W1B4 or higher

Max. number of associated STAs

256 (up to 128 STAs per radio, for General Usage)

64 (up to 32 STAs per radio, for HD Video)

Max. number of BSSIDs

32 (up to 16 BSSIDs per radio)

STA management

SSID hiding

Band steering

Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently.

Remote intelligent perception technology (RIPT)

Intelligent client identification technology

Intelligent load balancing based on the STA quantity or traffic

STA limiting

SSID-based STA limiting

Radio-based STA limiting

Bandwidth limiting

STA/SSID/AP-based rate limiting

Wireless roaming

Layer 2 and Layer 3 roaming

Authentication and encryption

Remote Authentication Dial-In User Service (RADIUS)

PSK, PPSK, web, 802.1X, MSCHAPv2, PEAP, WPA, WPA2, and WPA3 authentication

Data encryption: WEP (64/128-bit), WPA-TKIP, WPA-PSK, WPA2-AES, WPA3

Data frame filtering

Allowlist, static blocklist, and dynamic blocklist

WIDS

WIDS (Wireless Intrusion Detection System)

User isolation

Rogue AP detection and containment

ACL

Dynamic ACL assignment

●    ACL assignment based on time spans

●    ACL assignment (complete entry) based on MAC addresses

●    Execution of pre-configured ACLs (entry index) based on MAC addresses

CPP

Supported

NFPP

Supported

IP service

Static IPv4 address and DHCP-assigned IPv4 address

DHCP Snooping, Option 82, DHCP Server, DHCP Client

Multicast

Multicast-to-unicast conversion

IPv6 basics

IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 Ping

IPv6 DHCP Client

IP routing

IPv4/IPv6 static routing

VPN

PPPoE Client

IPsec VPN, up to five IPsec tunnels

Network management

SNMP v1/v2c/v3

Syslog

Debugging

Network management platform

Web-based management (Eweb)

Ruijie Cloud

User access management

Console, SSH, and Telnet-based management

FTP Client and TFTP Client

Fat/Fit/Cloud mode switchover

When the AP works in Fit mode, it can be switched to Fat mode through an AC.

When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet.

When the AP works in Cloud mode, it can be managed through Ruijie Cloud.

RG-AP810-L

Wi-Fi 6 (802.11ax) dual-radio indoor wireless access point

Up to four spatial streams

Data rate of up to 1.775 Gbps

1 x 10/100/1000Base-T uplink port, supporting PoE and DC power supply

Bundled with Ruijie Cloud Service lifetime license

 (The PoE injector is sold separately, which could be purchased from Ruijie.

The DC power adapter should be purchased from a third-party vendor separately if needed.)

Mandatory

RG-E-120(GE)

1-port PoE injector (1000BASE-T, IEEE 802.3af-compliant)

Optional